Series AMG Water Separator
Water can be a significant problem in pneumatic lines. If present, it can cause premature failure of components due to corrosion, contamination, or the removal of necessary lubricants. Dryers can address this problem but may not be the most cost effective solution in some situations.
The AMG series of water removal filters can be a simple solution where water needs to be removed but true drying may not be an option. The resin element of the AMG efficiently collects water droplets of all sizes with no additional power required and allows the liquid to be drained. They can be quickly added to equipment as a point of use solution when water problems are not widespread throughout a plant. Installing an AMG on equipment before it is sent out in the field can protect your components from air of questionable quality.
- Removes 99.9% of water droplets
- Lightweight and compact
- Low pressure drop
- Seven sizes with flows up to 424 SCFM (@ 100 psi)
- Modular connectivity with SMC F.R.L. components (to 1")
- Built-in Auto drain
SMC AC-B F.R.L. units
SMC’S new AC-B series of modular type F.R.L. unit is available in six basic sizes and is interchangeable with the existing modular AC line. The AC-B series has a maximum set pressure of 125 psi and offers embedded gauge and pressure switch options not found in the previous AC-A.
The element and bowl on the AF series is now one-piece, making element replacement easier. Required maintenance space has been reduced by as much as 46% on the AFseries, depending on the body size. Bowls on size 30 and up are now covered with a transparent bowl guard, completely protecting them from the enviromnent, and making the interior contents visible from 360 degrees.
- Improved flow performance over previous models
- Better visibility and safety from Dual Layered Polycarbonate bowl
- Easy maintenance and installation with newly designed spacer
- Mounting interchangable to previous versions