JVL develops and produces a wide range of versatile, high quality integrated servo motors and integrated stepper motors. JVL Industri Elektronik A/S is a leading company in the production and development of integrated AC servo- and stepper motors. The servo motor, the MAC motor, is based on a unique module concept that makes the ac servos easily adaptable to a very wide range of applications. The stepper motor concept, QuickStep, similarly offers a very wide range of versions for any application.
MAC Motor, Integrated Servo Motors
The MAC motor – the complete motion solution Brushless servo motor with integrated controller all necessary components in one unit
The basic idea in the MAC motors is to minimize the installation costs but also to make a component that is much better protected against electrical noise which can be a typical problem when using long cables between controller and motor.
The servomotor, hall sensor, encoder and electronics are specially developed by JVL so that they together form a closed unit where the power driver and controller is mounted inside the motor in a closed section.
The MAC motors can be delivered in sizes of
50 to 141W, the MAC050 to 141 range,
400W, the MAC400 motor,
750W, the MAC800 motor,
and in a size of 1500-3000W, the MAC1500-3000 motor.
Adapt your motor to your application with Expansion Modules
The JVL MAC Integrated Servo Motors utilize the unique module concept. Plug-in expansion modules adapt the motor to the application. You can choose connector type: D-Sub, cable glands or M12 connectors and you can choose freely between Profibus, DeviceNet, CANopen, Ethernet or nano PLC control. A High Speed and wireless modules add to the selection.
MIS Motor, Integrated Stepper Motors
The MIS motor – the complete motion solution Stepper motor with integrated controller. All necessary components in one unit
The basic idea in the MIS motors is to minimize the installation costs but also to make a component that is much better protected against electrical noise which can be a typical problem when using long cables between controller and motor.
The stepper motor, hallsensor or encoder and electronics are specially developed by JVL so that they together form a closed unit where the power driver and controller is mounted inside the motor in a closed section.
The MIS motors can be delivered in sizes of 1.1 to 2.9Nm, the MIS231 to MIS234 range, 2.5 to 7.2Nm, the MIS340 to MIS342 motor, the MIS430 to MIS432, 10.0Nm to 25.0Nm.
Adapt your motor to your application with firmware
The JVL MIS Integrated Servo Motors can be delivered with different numbers of M12 connectors depending of the application. The MIS17x and MIS23x motors can be delivered with RS485 interface and PLC built-in and optional CANopen. MIS34x and MIS43x have RS485 and PLC built-in and optional Profinet, EtherCAT, Ethernet/IP, Powerlink or MODBUS TCP/IP interface.
All MIS motors have optional magnetic absolute encoder built-in and MIS34x and MIS43 have optional absolute multiturn encoder built-in.
MIL Motors Linear Actuator NEMA08 to NEMA34
MIL Linear Stepper Motors with Integrated controller or driver
Linear Stepper Motors can dramatically reduce cost and save space. There is no coupling, no additional bearing support and no assembly work required. This not only reduce cost but also reduce failure rate due to the less number of components and more simple construction. In applications with small load ratings a linear guide is also not required. The special design and material of the nut secure long life operations.
- Non-Captive linear actuator with nut inside motor. Linear moving part can rotate so it should be fixed.
- External linear actuator. Nut are mounted on lead screw.
- Captive (will be available for NEMA34 in the future) and External linear actuator in NEMA size 23 and 34 can be delivered with integrated driver or controller
High Torque Stepper Motors
A series of step motors that have been designed by JVL for use with the entire range of JVL Step Motor Drivers and Controllers. They are high torque step motors especially made for mini- and microstep operation.
High torque motors from 0.01 to 50Nm. In NEMA08, NEMA17, NEMA23, NEMA34, NEMA43 and NEMA53 packages.
Stepper Motor Drivers
A series of stepper motor drivers that meets almost all the needs for precise control of stepper motors, incuding mini-stepping with up to 25000 ministeps per revolution.
Planetary, Robot and Worm Gears
Easy connection of your JVL motors to a wide range of gear boxes – worm, low cost planetary, high performance planetary and backlash free robot gear reducers.
- Low Cost Planetary Gears
- HFOS Worm Gears
- HTTW Worm Gears
- High Performance Planetary Gears
- Backlash Free Robot Gears