Remove Moisture/Water from your Compressed Air Lines – Refrigerated Air Dryers Series IDFB

SMC IDFBSMC dryers are insurance for down stream components, and in the long run, allow for sustainable performance and production for an end customer.  When considering a refrigerated dryer, Series IDFB can meet your dew point or dry air requirements for your compressed air.

  • Environmentally friendly R134a/R407C refrigerant
  • Simple control system, incorporating easy to read evaporator gauge
  • Stainless steel heat exchanger providing long life and low pressure drops – prevents rust formation
  • Compact design with staggered inlet/outlet ports for ease of installation – auto drain installed inside the dryer
  • 3/8″ push-in condensate drain port

SMC Series IDFB Refrigerated Air Dryers offer trouble free compressed air treatement

SMC IDFB Refrigerated Air DryerSMC dryers are insurance for down stream components, and in the long run, allow for sustainable performance and production for an end customer.  The dryer lowers the dew point of the compresses air to an acceptable level, removing moisture/water from the compressed air lines. When considering a refrigerated dryer, Series IDFB can meet your dew point or dry air requirements for your compressed air.

  • Environmentally friendly R134a/R407C refrigerant
  • Simple control system, incorporating easy to read evaporator gauge
  • Stainless steel heat exchanger providing long life and low pressure drops – prevents rust formation
  • Compact design with staggered inlet/outlet ports for ease of installation – auto drain installed inside the dryer
  • 3/8″ push-in condensate drain port

SMC IDG Membrane Air Dryers

IDG Membrane Air Dryer The membrane air dryer uses hollow fiber composed of a macro molecular membrane through which moisture passes easily, but is difficult for air to pass through.

Membrane air dryer series IDG is available in a single unit or combination unit style. IDG/M models combine a mist separator and micro mist separator with a single unit. IDG/V models combine a regulator with the IDG/M model. Options available include one-touch fitting exhaust of purge air. If purged air is not exhausted around membrane air dryer, air is exhausted with tubing away from its dryer.

  • Single unit style
  • 10 sizes available

·  Port sizes: 1/8″ to 1/2″