Your motor & driver can be used together!
SMC’s LE series of electric actuators are available in a motorless type, permitting the mounting of an AC servo motor other than the standard chosen by SMC. Shaft coupling and mounting patterns are compatible with servo motor series from 8 manufacturers.
Manufacturers include Mitsubishi, Yaskawa, Sanyo Denki, Omron, Panasonic, FANUC, FASTECH and Rockwell Automation (Allen-Bradley).
Motorless Actuator Models:
- LEF Series Slider Type – ball screw and belt drive models
- LEJ High Rigidity Slider Type
- LEY Series Rod Type
- LEYG Series Guide Rod Type
Increased performance with fewer variants
The New RU-U ultrasonic sensors from Turck offer unmatched mid-range sensing. The new ultrasonic sensor series with short blind zones and large measuring ranges reduces the number of variants required for sensing distances up to 300 centimeters.
The RU-U series offers three sensor lines with short blind zones and a long measuring ranges that can be taught directly on the sensor via pin 5 covering all requirements, regardless of whether analog or switching outputs are needed. The high-end version also offers parameterization and communication via IO-Link.
Further reducing sound emissions of already quiet compressors
OF series oil-less rocking piston – ideal for laboratory, medical, dental, gas generation, beverage dispensing, and other applications where noise and long life are key requirements. JUN-AIR has introduced a new generation of compressors with few moving parts, which reduces the noise, vibrations as well as wear and tear. The reduced noise and vibration level makes it possible to place the compressor directly at the place of use
The ZK2 Energy Saving Compact Vacuum Ejector is an extremely versatile unit for vacuum generation. It is an “All-In-One” unit that includes the supply valve, release valve, vacuum break flow adjustment needle, suction filter and silencer. It can be used at a stand alone unit or part of a manifold of up to 10 stations. Optional digital vacuum pressure switch can be easily copied to up to 10 switches simultaneously. The ZK2 can also be configured to that it can be used with a vacuum pump system.
The low cost CY-100 photoelectric and GX-M inductive proximity sensors offer a wide range of models to fit your application needs. Both sensors are available with 2m cable lengths or with M12 plug-in connector.
The New CY-100 series cylindrical photoelectric sensors provides a low cost, basic sensing solution
The New GX-M series cylindrical inductive proximity sensors feature high speed response frequency, and a high environmental resistance making this series is the new standard for metal sensing in the Panasonic line. M8, M12, M18, and M30 sizes are available.
Our LS-Series robots start at the unbelievable price of under $12,000 yet they provide the same EPSON quality, reliability, ease of use and now also expandability as our high performance G-Series robots. With this low price and the high reliability and capability of EPSON Robots, even more applications than ever before are now perfect candidates for EPSON Robot Automation solutions.
As a JUN-AIR Certified Service Center Ohlheiser Corporation provides the highest level of support service, performing diagnostics, repairs, service and rebuilds on all JUN-AIR products.
We maintain a minimum of one certified technician on staff at all times, stock necessary spare parts and units to service or replace products, and maintain all necessary equipment and facilities to perform diagnostic testing and repairs of JUN-AIR Products.
The membrane air dryer uses hollow fiber composed of a macro molecular membrane through which moisture passes easily, but is difficult for air to pass through.
Membrane air dryer series IDG is available in a single unit or combination unit style. IDG/M models combine a mist separator and micro mist separator with a single unit. IDG/V models combine a regulator with the IDG/M model. Options available include one-touch fitting exhaust of purge air. If purged air is not exhausted around membrane air dryer, air is exhausted with tubing away from its dryer.
- Single unit style
- 10 sizes available
· Port sizes: 1/8″ to 1/2″
The CBL Series of electric cylinders offer the high speed performance, long cycle life and competitive pricing that the package industry demands. These 35mm diameter electric cylinders offer over 100 million cycles with acceleration up to 50G, operating at over 2,000 cyles per minute (CPM).
Designed for fast, easy stroke adjustability the CBL allows extremely precise speed, acceleration and force adjustments in a fraction of the time pneumatic cylinders require, and with no manual readjustments.
- “Soft-land” function provides accurate location and force control
- 100% data feedback
- No external switches or sensors required
- Low 1.5 amps, 24V power consumption
The SFE filter’s hollow fiber membrane filter traps and filtrates the impurities from the compressed air through the overlapping layered fine holes. Air can be directly exhausted in a clean room simply by mounting this product to the pneumatic equipment in the clean room.
- No need for piping for exhaust air and relief air.
- Reduces piping installation work and space.
- Filtration rating : 0.01μm (Trapping efficiency 99.99%)
- Maximum flow capacity : 200 L/min (ANR)
- Noise reduction : 30 dB (A) or more