Baumer AlphaProx family are the perfect solution for reliable non-contact measurement of changes in the position of metal objects. Thanks to their high temperature stability in connection with large measuring distances, the high degree of consistency and their robustness, the sensors are ideally suited for measuring positions and angles, controlling and monitoring belt tension, controlling sag and measuring low-frequency vibrations.
Electric actuators offer a significantly increased amount of control over the motion profile, in a non-pneumatic environment. The LER rotary series is SMC’s newest member of the LE electric actuator family.
The LER uses a 24VDC step motor within a compact body to transmit torque through a rotating table. Radial and moment loads are supported by a deep groove ball bearing or a special high-precision ball bearing (option). Step data can be written to the controller using PC software or a portable teaching pendant. Absolute and relative angular positions can be set, along with full definition of speed, acceleration and deceleration. A complete package including actuator, controller, robot cable, and I/O cable can be specified using one simple part number.
- Automotive/Heavy Vehicle
- Forestry/Paper Products
- Material Handling
Economical pneumatic cylinder replacement
The ERD is an economical electric cylinder and is compatible with many NEMA & metric mount stepper and servo motors to create a flexible, powerful, yet cost-effective electric cylinder solution over traditional pneumatic cylinders.
ERD Electric Cylinders
ERD electric cylinders are the perfect choice for gating, sorting, diverting and product change overs.
ERD-SS2 stainless steel electric actuators
Made of all 304 stainless steel, ERD-SS2 actuators have IP67 and IP69K static ratings for washdown-ready performance.
ERD Hygienic actuators (3A/USDA Approved)
ERD hygienic actuators with welded seams are approved for use in meat (livestock), poultry and dairy food processing applications
SMC’s popular SY 5 port solenoid valve series is now available in an Intrinsically Safe (IS) version for volatile environments. The 53-SY series solenoid valve is the intrinsically safe version of out flagship of pneumatic valve product line. The SY series offers flexibility, reliability and sonic conductance (throughput) within a small footprint.
SMAC programmable actuators allow 100% detailed inspection and verification for all mission critical parts and are being used in a variety of applications such as screw thread checking, switch tests, quality measurement, effort testing, displacement testing and more. SMAC can provide unique inline quality control solutions that successfully automate inspection procedures.
SMC dryers are insurance for down stream components, and in the long run, allow for sustainable performance and production for an end customer. When considering a refrigerated dryer, Series IDFB can meet your dew point or dry air requirements for your compressed air.
- Environmentally friendly R134a/R407C refrigerant
- Simple control system, incorporating easy to read evaporator gauge
- Stainless steel heat exchanger providing long life and low pressure drops – prevents rust formation
- Compact design with staggered inlet/outlet ports for ease of installation – auto drain installed inside the dryer
- 3/8″ push-in condensate drain port
Parco’s T-slotted extrusion frames are perfect for your guarding needs. Now they can also powder coat the extrusion in safety yellow for higher visibility. Wire partitions and Lexan perimeter guards protect your operators from automated and robotics equipment, and provide a safe and clean environment.
In this white paper, we’ll examine the features you should look for in advanced AC servo drives and provide an overview of the applications these features target.
SMC’s S0700 series offers a compact valve and manifold design with high flow capacity. The 5 port solenoid valve has a 7mm width, and is available in both plug-in and plug lead types. Applicable manifolds include serial transmission types, D-sub connectors, flat ribbon cable, PC wiring system compatible, flat ribbon cable, terminal block, lead wire, and circular connectors.
The GT707 7 inch HMI can fit in a 5.7 inch type space, the screen shows more and the product looks greater. GT707 offers easy-to-view screen thanks to use of a TFT LCD with 500: 1 contrast ratio. The slim frame and body are designed for easy installation compared to LCD.