831 North Mountain Road. Newington, CT. 06111
Tel: 860.953.7632 Fax: 860.953.9234
|
SJ 300 Series Specifications
Appearance |
|
Power
Source |
Rated
input
voltage |
1-phase |
- |
| 3-phase (200V) |
200-240V
+/-10%,50/60Hz |
| 3-phase (400V) |
380-480V +/-10%,
50/60Hz |
| Applicable motor |
0.4-150kW |
| Output frequency range |
0.1-400Hz |
| Starting torque |
200% (180% 75kW
and above) or greater at 0.5Hz
150% (130% 75kW and above) or greater at 0Hz domain
with a smaller motor by one frame size |
Continuous operating torque
speed range |
Up to 3.7kW:
6-60Hz (1:10) 5.5kW and above : 20-60Hz (1:3) |
| Braking torque |
Dynamic brake
(capacitor feedback) |
10-20% |
| DC brake |
Variable operating
frequency, time, and braking force |
| Overload capacity |
150%, 60sec.,
200%, 0.5sec. |
| Acceleration/deceleration time |
0.01-3,600sec. |
| Multispeed operation |
Max. 16-stage (Bit
command also available) |
Analog input
for frequency control |
0 -10VDC, 4-20mA,
-10 to +10VDC |
| Protective funcitons |
Over-current,
overload, braking resistor overload, over-voltage, EEPROM error, under-voltage error, CT
(Current transformer) error, CPU error, external trip, USP error, ground fault, input
over-voltage, instantaneous power failure, expansion card 1 error, expansion card 2 error,
inverter thermal trip, phase failure detection, IGBT error, thermistor error |
| Other functions |
V/f free-setting
(up to 7 points), frequency upper/lower limit, frequency jump, accel./decel. curve
selection, manual torque boost value and frequency adjustment, analog meter tuning, start
frequency, carrier frequency, electronic thermal protection level, external frequency
output zero/span reference, external frequency input bias start/end, analog input
selection, retry after trip, restart after instantaneous power failure, various signal
outputs, reduced voltage soft start, overload restriction, default value setting,
deceleration and stop after power failure, AVR function, fuzzy accel./decel.,
auto-tuning(on-line/off-line), high-torque multi-operation |
Environmental
Conditions |
Ambient operating temperature |
-10 to 50 °C |
| Humidity |
20 to 90%RH(No
condensation) |
| Location |
Less than 1,000m
of altitude, indoors(no corrosive gas nor dust) |
|
|
|
