831 North Mountain Road. Newington, CT. 06111
Tel: 860.953.7632 Fax: 860.953.9234
|
L100 Series Specifications
|
Appearance |
|
Power
Source |
Rated
input
voltage |
1-phase |
200-240V +/-10%,
50/60Hz +/-5%,100-115V +/-10%, 50/60Hz +/-5% |
| 3-phase (200V) |
200-230V +/-10%,
50/60Hz +/-5% |
| 3-phase (400V) |
380-460V +/-10%,
50/60Hz +/-5% |
| Applicable motor |
0.2-7.5kW |
| Output frequency range |
0.5-360Hz |
| Starting torque |
100% or greater
(Torque boost mode) |
Continuous operating torque
speed range |
- |
| Braking torque |
Dynamic brake
(capacitor feedback) |
20-100% |
| DC brake |
Variable operating
frequency, time, and braking force |
| Overload capacity |
150%, 60sec. |
| Acceleration/deceleration time |
0.1-3,000sec |
| Multispeed operation |
Max. 16-stage |
Analog input
for frequency control |
0-10VDC, 4-20mA |
| Protective funcitons |
Over-current
protection, over-voltage protection, under-voltage protection, overload protection,
temperature error, CPU error, EEPROM error, ground fault, external trip, input over-
voltage protection, USP error, PTC error |
| Other functions |
AVR function,
frequency upper/lower limit, PID control, carrier frequency change, frequency jump,
electronic thermal level adjustment, fine adjustment of start frequency, gain/bias
setting, retry, automatic torque boost, trip history |
Environmental
Conditions |
Ambient operating temperature |
-10 to 50 °C * |
| Humidity |
20 to 90%RH(No
condensation) |
| Location |
Less than 1,000m
of altitude, indoors (no corrosive gas nor dust) |
| *See derating data
and carrier frequency adjustment in instruction manual when ambient operating temperature
is 40 °C or over. |
|
|
|
