ocbnr.gif (7257 bytes)
831 North Mountain Road · Newington, CT 06111
Tel: 860-953-7632 · Fax: 860-953-9234

cejnlogosm.jpg (1727 bytes) Pneumatic Series
Quick Connect Couplings

img10.gif (15074 bytes)

The Optimal choice for

  • Performance

  • Convenience

  • Safety

 

Some of the most important features...

 

chart.jpg (3845 bytes)


cplgcut.jpg (1841 bytes)

Performance

A Quick Connect Coupling is usually the point where the most restriction occurs in the flow path between the compressor and the air tool. This means loss of efficiency at the air tool and higher energy demands on the compressor resulting in increased cost.
It is therefore extremely important to choose a coupling which gives the best perfomance and a low pressure drop.
Because of their unique valve design CEJN pneumatic couplings offer an almost unrestricted flow and minimal pressure drop. To further assist in keeping the pressure drop to a minimum the valve spring has been positioned outside the flow path.

 

Convenience
To reduce down-time and increase productivity, ease of handling of
the coupling both during installation and operation is most important.

 

plug.jpg (1674 bytes)cplgfull.jpg (1965 bytes)

Push-to-Connect Action
The automatic push-to-connect function, which is a standard feature in all CEJN pneumatic couplings, makes a quick and easy connection.

Easy to Install
Both couplings and nipples are available in a wide range of connections and sizes which makes installation easy and eliminates the need for adaptors.

Light Weight
In spite of the high flow capacity CEJN pneumatic couplings have very small external dimensions. Less bulk means less weight and reduced operator fatigue.

 

Safety

Safety has become a most important factor in modern industry.
In order to meet this need CEJN have put a high priority on the development of safety couplings.

 

safetylok.jpg (4328 bytes)

Safety Locking Device
To prevent accidental disconnection an automatic safety locking device has been incorporated in coupling series 342/343 and 442/443.
When disconnecting a two-hand operation is required where the nipple and the locking sleeve must be simultaneously activated.

Anti Hose Whip Nipples
For most of the pneumatic series anti hose whip nipples are available. These nipples have a special valve allowing normal upstream air flow. When disconnecting the valve only permits the down stream air to escape slowly, preventing the dangerous whip-action of the hose.

 

Steam-Line-System

 

streamline.jpg (6530 bytes)

In addition to the range of female, male and hose barb connections, CEJN has developed a direct hose connection which eliminates the use of hose clamps and fittings.
The Stream-Line connection is based on and fits CEJN Polyurethane hose which is available as straight, braided, non braided, as well as coiled.

 

Link: Ohlheiser Home Page link: Ohlheiser Products Listing Contact Us By Email