Our Technologies

Pneumatics & Vacuum

Controls

Robotics

Motion Control

Sensing

Safety

Machine Vision & ID

UV Curing

Aluminum Extrusion

 

Join Mailing list

Jun_air Services Center
We are an Authorized Jun-Air Service Center

 

GAST Service Center Gast Service Center Ohlheiser is Certified GAST Service Center

 

 


Nexen logoNexen Group, Inc. is a leading manufacturer of precision motion control components, power transmission and web tension control products for a wide array of industrial applications. Products include high precision linear and rotary systems, linear locking components, pneumatic brakes and clutches, torque limiters and electronic tension controls. 



Precision Roller Pinion SystemNexen RPS

The Roller Pinion System (RPS) is based on an innovative pinion consisting of bearing-supported rollers and a unique tooth profile.

This unique drive system provides very high positional accuracy, near-zero backlash, virtually no cumulative error, low-velocity ripple, unlimited length, very high speeds, high rigidity, low noise, low (in some cases no) maintenance, corrosion resistance, long life, and 99% efficiency. This opens up new machine design possibilities and provides the capability to achieve much higher levels of performance.

HIGH SPEEDS. - 11 m/s (36 ft./sec.)

INCREDIBLE ACCURACY. - ±30um (±0.00118 in.)

ZERO BACKLASH.

UNLIMITED LENGTH

Roller Pinion Systems


Nexen Rail BrakesRail Brakes

Nexen’s RB Series of linear profile guide rail brakes uses spring force to secure the load in holding applications. Superior response time, high force for stopping, and holding in e-stop and power-off situations. Each RB brake clamps directly onto the center of the guide rail to provide positive braking and holding in all axes, with no effect on bearing surfaces. These profile rail brakes hold position accurately by reducing drive train backlash and elasticity.

Rail Brakes


Nexen Rod Locks Rod Locks

Nexen’s Static Rod Locks deliver precision holding with virtually no backlash, providing high accuracy in demanding applications. These spring-engaged, air-released units come in both ISO and NFPA sizes. The Rod Lock’s large clamping surface ensures high clamping/holding force and Nexen offers models for use on a pneumatic cylinder or as a stand-alone unit on a guide rod. The design is sealed and features a natural brushed aluminum finish or a corrosion-resistant, anodized finish.

Rod Locks


 

Nexen Servo Motor Brake Servo Motor Brakes

Spring engaged, air released servo motor brakes mount to the shaft end of servo motors up to 20 horsepower. The brake acts as an adapter between dissimilar mounting features. The brake bore accepts the motor shaft that is fixed inside the brake with a split hub/shaft collar. This brake is a high-torque, zero backlash device.

Servo Motor Brakes


Nexen Ball Screw Brake Ball Screw Brakes

Ball Screw brakes provide reliable holding in a compact package. During a power loss the motor has no holding torque allowing the ball screw to back drive and the load to drop. Ball screw brakes connect to the machined end of the ball screw to prevent back driving, load drops and equipment damage during a power loss. Holding force up to 125 Nm (1100 in-lbs.)

Ball Screw Brakes


Nexen Linear Couplings Linear Couplings

Linear Couplings Provide Zero Backlash Misalignment Control Between Linear Actuators Like Linear Motors, Ballscrew Actuators, Pneumatic Cylinders, And Rods Or Sensors They Drive To Prevent Binding Or Premature Wear.

Linear Couplings


Nexen Harmonic Gearheads Harmonic Gearheads

Harmonic Gearheads offer true zero backlash, high reduction ratios of 50/80/100/120:1, and high load capacity in a very compact package. They utilize the best cross roller bearing technology for the highest rigidity and load capacities. They are available in ISO9409 flange mount or with an integrated RPS pinion. The integrated pinion models offer the ultimate in RPS system performance and simplify installation.

Harmonic Gearheads


Nexen Pinion Gears Roller Pinion Gear System

The Roller Pinion Gear System (RPG) is based on an innovative pinion consisting of bearing-supported rollers and a unique tooth profile. This unique drive system provides very high positional accuracy, near-zero backlash, virtually no cumulative error, low-velocity ripple, unlimited length, very high speeds, high rigidity, low noise, low maintenance, corrosion resistance, long life, and 99% efficiency. This opens up new machine design possibilities and provides the capability to achieve much higher levels of performance.

Roller Pinion Gear System


Nexen Precision Ring Drive Indexer Precision Ring Drive Indexer

The Precision Ring Drive (PRD) combines Nexen’s innovative Roller Pinion System (RPS) technology with a precision-grade bearing and gearhead, it takes indexing or rotary positioning systems to a higher level of performance, providing unmatched positional accuracy, high rigidity and acceleration, low maintenance, and long life. The Nexen PRD is ultra-efficient and very quiet at moderate speeds. In addition, the PRD can produce accelerations up to twice as high as similar indexing technologies, providing more productivity.

Precision Ring Drive Indexer


Nexen Indexer Brake Indexer Brakes

Nexen’s I-300 brake is designed for zero backlash holding and emergency stopping making it ideal for indexers and positioning systems. The spring engaged, air released, patented braking element locks and holds the shaft in position without any displacement or reversing of the load. It is flange or shaft mounted and has a keyless compression bushing shaft connection for easy installation and IP67 rated when flange mounted.

Indexer Brakes

Nexen home page


SMC Epson GAST Micropump Baumer Turck JunAir Baco Controls Anderson CEJN Coilhose Desoutter ESA Euchner FreelinWade Hitachi ZenPure LinkTech MOXA NB Linear Neugart Norstat Panasonic Parco Pinnacle Pizzio PULS SMAC Stabilus Sunx Vmeca Airpot Airpel WIKA Advanced Air Werma Request a Quote